Hartelijk welkom op de producten pagina van MUYEN uit Tiel, alles voor het hijsen, bewerken en transporteren van glas. View our wide purchase range, made in Holland. Regardless of the size of the job. We can always advise you for a product that matches your project. We are the people from "the green stuff"
This cutting table has a contra weight, 3200×2200 mm. Glassnijtafel
This table can be tilted and wheeled.
This machine can turn 360 degrees and tilt horizontal to vertical position.
A frame of 2000 mm long, 1500 mm high, and a load capacity of 180 mm on one side.
This Trolley is special made for use on the building site.
Vacuum machine with 2 pads, “lite” 250 kg max, complete battery, own weight 15 kg.
This vacuum machine on battery is very light and can still lift 350 kg.
This machine is special made to use in your storage.
Dit model zuiger heeft een laag eigen gewicht van ongeveer 25 kg en is zeer compact.
The machine has 2 pads who can turn 360 degrees.
A battery machine, turn 360 degrees en tilt, with a oval plate, single system.
Winow mate XL, Compact transport, up to 150 kg, adjustable in height (ground floor) 2 mtr.
A light weight wagon with a frame in the dimensions 1000 mm long, 950 mm high.
this machine is suitable 900 kg 9 pads and 700 kg with 7 pads, turn and tilt.
This vacuumlifter is suitabel for 400 kg curved glass.
The window mate S. With this glass installation tools, you prevent back problems.
De valbeveiliging is voorzien van luchtbanden die tegen de wand kunnen stoten zonder schade te geven.
Lifter with contra weight, 1 to 3 mtr, 1500 to 500 kg, 500 kg contra weight.
This car is easy to transport , compact and small.
The vertical band grinder with table for standard grinding work, also suitable for round glass.
this is a extenable alu. lift in 3 parts, 2.2 to 3.5 mtr and with a separet part to 5.5 mtr high.
Glass handling Equipment, This is a extendable aluminum lifter from 2 to 3.5 m, 250 kg maximum.
This machine is only 17 cm thick, build very compact.
Een schuifstelling voor de glasmaat 170×260, 225×321 cm, met een opzet voor 500 kg glas per schuif.
Vacuüm lifters, with 4 handcups.
Vacuum lifters can be delivered in serveral models, this machine is suitable for 400 kg.
Powr-grip machinery, hand cups and vacuummachine dual system on battery.
This vacuumlifter has one basic unit where you can change suction pads very quick and safe.
The battery operated vacuum machine for 2500kg.
The battery operated vacuum machine for 1250 kg.
A battery machine, turn 360 degrees en tilt, with a oval plate, single system.
De valbeveiliging is voorzien van luchtbanden die tegen de wand kunnen stoten zonder schade te geven.
This device operates at 220 or 380 volts and is provided with acoustic signal.
More information, sent us a e.mail or give us a call.
this machine is suitable 900 kg 9 pads and 700 kg with 7 pads, turn and tilt.
This machine is battery operated and can turn and tilt 360 degrees.
This machine can also be delivered in Dual system.
Basic “about” 2200×1200 mm, hight sliding 1950 mm to 3300 mm.
Glass lifting tools are delivered in several models and from several producers.
This lifter is special made to install conservavory glass houses, and glass on roofs.
This car is completely disassembled, 250 kg max. Mobile on hard rubber wheels.
This car is mobile on 3 big air tires, with 100 kg countra weight.
This car is completely disassembled, 150 kg max. Mobile on hard rubber wheels.
This car is completely disassembled, 150 kg max. Mobile on hard rubber wheels.
This machine is special made for installation of computer floor and installing bigger floor panels.
Glass sledge, 1500 mm long, with vacuum pads.
This trolley is very usefull to move nature stone plates in your workshop.
This trolley is 2 meters long, 150 high and has 18 cm room below.
Glass Carrier, with airwheel and a powr-grip vacuum pad.
Een schuifstellling voor de glasmaat 170×260, 225×321 of 255×321 cm.
This lift is very good to use in combination with a VA114B battery operated machine.
Lifter with contraweight, 50 to 200 cm, 750 to 250 kg.
The aluminium lifter for the scaffolding “Gevelridder , pulls out from 5 to 10 mtr.
The aluminium lifter, extendable from 5 m to 9.5 m, 250 kg max.
Clamp for powrgrip hand suction cups, for example to connect inner walls and allow a glue to dry.
The cutting table can be build in serveral sizes. It has built in burner, breakers and a liminated glass cutter
A glass cutting table available in various sizes with or without cutting bridge.
Ideal tool for the application of the seal of edges or mounting frames.
A frame with rollers, to use by your grinding machine when you have bigger glass plates.
With a length of 1300 mm a good help the cut bigger glass plates.
This liminated glass cutter can be used when you have a cutting table with rollers.
Complete automatic lifter, works on battery, up to 75 kg.
Cookie Policy Terms and conditions © 2022 GlassHandling - 
