This floor lift works manual with a hand pump so you do not need any Electrics or air hose to use this machine. This model is produced for steel floor plates but ofcourse you can think about much more solutions. deze vloerplatenlift …

More info

Window mate Serie is a range off products who can transport and install the Glass on ground level.                

More info

The Giraffe Series Giraffe Series

The Giraffe series are lifter adjustable in height in several dimensions.

More info

The window mate S. With this glass installation tools, you prevent back problems, you can lift the glass plate from the truck and bring it to the building site, this all by just one person! The window mate in use:  https://youtu.be/Mj3pO_3tqX0  …

More info

The Powerlifter can lift up to 240 kg, the Powerlifter can turn the glassplate 360 degrees. The vacuumlifter is adjustable so you can also use it on the Elephant, Giraffe and Sir Liftalot series, The Powerlifter mast can rotate 180 degrees with foot …

More info

Glass handling Equipment, This is a extendable aluminum lifter from 2 to 3.5 m, 250 kg maximum. He has a special top so you can easy lift the glassplat from the truck, or place glass from the inside over heaters …

More info

this is a extenable alu. lift in 3 parts, 2.2 to 3.5 mtr and with a separet part to 5.5 mtr high, the lifter has also a distance holder and pull up installation. We advice you to use this machine …

More info

The aluminium lifter, extendable from 5 m to 9.5 m, 250 kg max., with pull up installation, with its light weight an ideal tool for placing external glazing in a house or appartment ground, 1st and 2nd floor. You can …

More info

The aluminium lifter for the scaffolding “Gevelridder , pulls out from 5 to 10 mtr, fits over any scaffolding because he is standing safe and is adjustible,maximum weight up to 200 kg. With its light weight an ideal tool as …

More info

This car is completely disassembled, 150 kg max. Mobile on hard rubber wheels. LxW 1350×900 mm, height 1950 mm to 2800 mm. An ideal (light running) tool for use inside buildings where no possibility is against the wall. It is …

More info

UK: This car is completely disassembled, 250 kg max. Mobile on hard rubber wheels. LxW 1500×900 mm, height 1950 mm to 2800 mm. An ideal (light running) tool for use inside buildings where no possibility is against the wall. It is …

More info

Basic  “about” 2200×1200 mm, hight sliding 1950 mm to 3300 mm. A perfect device for placing the glass also higher then ground floor, eg voids.

More info

This car is completely disassembled, 150 kg max. Mobile on hard rubber wheels. The length is about 130 cm, 230 cm and width 90 cm. An ideal (light running) tool for use inside buildings where no possibility is against the …

More info

Triangle wagon, small, 250 kg, complete with winch, stear, special direction adjustible wheels, about 220 long and  2.3 high, the car is easy to disassemble, and therefore easy to transport. only for use on ground leval, The car is only …

More info

This car is mobile on 3 big air tires, with 100 kg countra weight, length about 3 m, height about 2.8 meters, the car can easily be disassembled, complete with winch, only suitable for use on the ground floor, perfect …

More info

Winow mate XL, Compact transport, up to 150 kg, adjustable in height (ground floor) 2 mtr, complete with vacuumlifter turnable 360 degrees, very small so very easy in small areas and angles. Glass installation, glass handling equipment. More informatie: http://muyen.com/wp-content/uploads/2013/11/ruitenplaatser-pdf.pdf Window …

More info

This gentry crane is available in various sizes, can be disassembled and available with manual winch or electric winch. Ideal for lifting a panel of a A frame on site, on to trolley. You can work alone so it saves …

More info

Crane system, by hand or electric. the overhead crane in use at a customer: https://youtu.be/Spx5uWzf4ik kraanbaan, bel ons voor meer informatie omdat er vele mogelijkheden zijn

More info

Complete automatic lifter, works on battery, up to  75 kg, but there is already a model for 120 kg. Sent us a e.mail for more information. De tiller, werkt automatisch op batterijen tot 75 kg, maar er is ook een …

More info

this machine for curved glass, can turn 360 degrees and tilt, for inside and outside curves. 8 pads 400 kg, va114ig400 also availible with 4 pads 200 kg. va114ig200 Dimensions pad +/- 650×650 mm complete dimensions: gebogen glas zuiger schets   …

More info

this machine is suitable 900 kg 9 pads and 700 kg with 7 pads, turn and tilt. It works with a basic battery unit which can be used with athor suctiun plates, it comes complete with a suitcase with spareparts.

More info

Glass lifting tools are delivered in several models and from several producers, The glass lift 250 is a luxurious form of the triangle car and a good sample off these Glass lifting tools.  There products we do not producer our selves, …

More info

This kit includes a car with a frame of 1000×950 mm, with 2 tie rods. At the bottom timber is provided with a width of 110 mm. The carriage 4 runs on pneumatic tires, but can also be used with …

More info

Protect your legs and feet.

More info

Door carrier and installation assistant, transport and install any type door without heavy work.

More info

Lifter with contraweight, 250 – 450 kg max to 1.07 mtr, ballast 150 kg Evenaar met contragewicht ballast 150 kg 600 mm 450 kg, 1070 mm 250 kg,

More info

Lifter with contraweight, 50 to 200 cm, 750 to 250 kg. Hijsen met evenaar op de bouwplaats Evenaar met contra gewicht, 50 tot 200 cm, 750 tot 250 kg. 250 kg ballast.  

More info

UK: Lifter with contra weight, 1 to 3 mtr, 1500 to 500 kg, 500 kg contra weight. NL: Steker, evenaar met contra gewicht, 1 tot 3 mtr, 1500 tot 500 kg, 500 kg ballast 3 mtr 500 kg 2 mtr …

More info